RCBS Case Neck Turners
RCBS HAND CASE NECK TURNER KIT
The RCBS Hand Case Neck Turner is designed to "peel" the brass from the outside of your case necks to a consistent thickness.
Most commercially available brass has variances in the case neck thickness. This leads to case neck concentricity and bullet run-out issues. Truing up the case neck produces more consistent and accurate hand loaded ammunition.
The cutter portion uses calibre specific pilot/mandrels (sold separately) to guide the case neck.
The cutter design features the ability to "zero" the cutter to the pilot/mandrel and then use the micrometre adjustment to dial the desired case neck thickness in 0.0005 inch increments. The cutter can also be set for right or left hand use.
- Material: Steel
- Calibre Sizes Accepted: 17-50 Calibre
- Pilots Used: RCBS (sold separately)
- Accuracy: 0.0005 inch
- Ergonomic case holder
- Right or left handed use
- Micrometer adjustable
- Ability to zero the cutter to the pilot/mandrel
|R90401||RCBS HAND CASE NECK TURNER KIT|