Search Our
Product Range

ZP-1 AUTO STABILISING MONOPOD ADAPTER PLATE ONLY

ZP-1 AUTO STABILISING MONOPOD ADAPTER PLATE ONLY
The ZP-1 Auto Stabilising Mono-Pod can be installed onto multiple firearms by custom fitting additional adapter plates to the butt of your firearm. (Note, one adaptor plate is provided with the ZP-1)

FITTING INSTRUCTIONS:

Important: Ensure rifle is unloaded during installation.

Lubricate screw driver with gun oil. Unscrew existing screws and remove existing recoil pad from rifle.

1. Unscrew ZP-1 cap.

2. Remove insert.

3. Lubricate screwdriver with gun oil, using factory screws mount directly to rifle stock incorporating adaptor plate (if needed).

Reinstall insert and fasten cap finger tight.

ADAPTER PLATE SHAPING:

Lubricate screw driver with gun oil. Unscrew existing screws and remove existing recoil pad from rifle.

1. Attach adapter plate to rifle stock.

2. Scribe/trace around your stock profile.

Remove adapter plate from rifle stock, file and sand to shape. Test and check fit during this process until desired profile is achieved.

To determine if the ZP-1 adapter plate will fit your rifle a template is available by opening the Product Attachement pdf below.

Product Details

Item Code Description
ZP1PLATE ZP-1 AUTO STABILISING MONOPOD ADAPTER PLATE ONLY

Product Video

Back to ZP-1 Mono-Pod